免费看啪啪网站-免费免播放器在线视频观看-免费免费啪视频视频观看-免费免费啪视频在线-黄色自拍偷拍-黄色字幕网

The specification of FSDHE4000
The 1 work area processing width 4000mm, length can be customized according to customer needs
2 spindle number: 1
Processing capacity: diameter 14.1-75mm, thickness 100mm
Spindle power vector type, low speed high torque can be obtained
Spindle clamping force of up to 1520kg
Using BT50 side fixing type cutter bar
The spindle dynamic all adopts the servo feed, German STAR ball screw and guide rail transmission
The spindle under the speed of up to 6000mm/min, the spindle RPM3000
3.X shaft transmission structure using direct drive transmission, no belt type transmission accuracy is poor
Servo feed used in Japan Mitsubishi servo motor and precision reducer
4.X/Z shaft
X, Z axis are all adopted the German STAR ball screw, linear guide rail, a slider
With four rows of ball groove, high strength, high precision positioning
Low friction, can be maintained for a long time accuracy
High load capacity can withstand four direction
Suitable for high speed application
Design of a roller to keep walking device, the smooth degree of the good
Low noise, good lubrication
5.Y shaft transmission gear rack + + linear guide
The 6 control system with radio remote control function
Two optimal drilling efficiency can be automatic analysis and sorting, without manual time-consuming calculation
Drilling graphics source: DXF (automatic sorting or artificial sort)
Drilling window function, can be seen to be Drilling Graphics
Back drilling
With field mapping function, provide on-site real-time online service
Drilling large plate, first made such A, B, C, D four corner points, allow the operator to confirm again
When drilling can be set arbitrarily combination, such as drilling, delay, upper and lower...... And so on, can be combined with 99 different movements, and stored in the controller, may at any time lets the user pick
Directly positioning drilling, not necessary to reopen after the blackout origin, need not be zero re run
With functions of pause: pause time range without limit
With emergency stop function
With process non transport function